Introduction To Anchor Plate - H3C S9500 Series Installation Manual

Installation Manual
H3C S9500 Series Routing Switches
Caution:
The feet are insulated. The anchor plate components include insulating units. During
construction, make sure that the insulating units are correctly installed so that the whole
set of equipment is insulated from the ground before the ground wire is connected, thus
effectively meeting the insulation requirement.
B.2.1 Introduction to Anchor Plate
The anchor plate of the B68-22 cabinet is shown in Figure B-1, and the installations of
the anchor plate and cabinet feet are shown in Figure B-2.
(1) Cabinet foot fixing connection trough
Figure B-1 Anchor plate of the B68-22 cabinet
(1) Cabinet foot
(3) Retaining nut of anchor plate
(5) Spring washer Φ12
(7) Insulating covering
(9) Expansion tube
(11) Anchor plate of the B68-22 cabinet
Figure B-2 Composition of Anchor plate of the B68-22 cabinet
Appendix B Installation of B68 Cabinet
(2) Anchor plate fixing connection hole
(2) Retaining nut of the cabinet
(4) Bolt M12×70
(6) Big flat washer Φ12
(8) Insulating washer of anchor plate
(10) Expansion nut
B-2