Rip - Billion BiPAC 8200AXL-1200 User Manual

RIP

Enable this Routing Information protocol for the router to communicate with other rip-enable devices.
RIP: Select Enable, the router communicates with other RIP-enabled devices.
Interface: Choose the router interface that uses RIP.
Receive Mode: Choose the interface RIP version that receives RIP messages. You can choose RIP1, RIP2, or
Both.
Choose RIP1 indicates the router receives RIP v1 messages.
Choose RIP2 indicates the router receives RIP v2 messages.
Choose Both indicates the router receives RIP v1 and RIP v2 messages.
Send Mode: The working mode for sending RIP messages. You can choose RIP1 or RIP2.
Choose RIP1 indicates the router broadcasts RIP1 messages only.
Choose RIP2 indicates the router multicasts RIP2 messages only.
Add: Click it to add the RIP interface to the Rip Configuration List.
Delete: Select a row in the Rip Configuration List and click it to delete the row.
60