Powerscan ® M8300/Star-Modem™ In Stand-Alone Mode - Datalogic PowerScan D8300 Reference Manual

®
POWERSCAN D8330/M8300/M8300-DK
4.5.2 PowerScan
To configure a PowerScan
Stand-alone Mode, follow the procedure in par. 4.5 substituting steps 6 and 7 with
those below:
6.
Read the code above and the four-digit address of the STAR-Modem™.
7.
END of procedure.
YOUR READER IS NOW READY TO READ BARCODES.
To change the defaults see par. 4.10.
30
®
M8300/STAR-Modem™ in Stand-Alone Mode
®
M8300 reader to communicate with STAR-Modem™ in
STAR-Modem™ Address
ÌRSRÎ
Exit and Save configuration
Ì$-?Î