Datalogic PowerScan D8300 Reference Manual page 9

®
POWERSCAN D8330/M8300/M8300-DK
BC-80X0 / C-8000 CRADLES
Scan Finder
Button
LEDs
Figure C – BC-8000
The label on the cradle contains LED indicators and a scan finder button. When the
button is pressed, the cradle transmits a "broadcast" message. All properly
configured scanners (Radio RX Timeout set to keep the radio "awake") linked to that
base (through a bind or a join sequence) and within radio range coverage will emit a
beep sequence once every 2 seconds for 30 seconds. A scanner is considered to be
linked when the last transmission ends properly.
The scan finder works only in stand-alone layout (point to point or multiple readers).
LEDs
Figure D – C-8000
viii