Datalogic PowerScan D8300 Reference Manual page 41

®
POWERSCAN D8330/M8300/M8300-DK
6.
four digits from the Numeric Table in the range 0000-1999.
7.
Read the code above and the four-digit address of the First STAR-System™
8.
Read the code above and the four-digit address of the Last STAR-System™
Whenever the system is composed of a single base station, the
first and last base station addresses (steps 7 and 8) must have
the same value.
NOTE
9.
END of procedure.
YOUR READER IS NOW READY TO READ BARCODES.
To change the defaults see par. 4.10.
32
Set Radio Address
ÌRF8Î
All readers must have different addresses.
First STAR-System™ Address
ÌRSRÎ
device in the system.
Set Last STAR-System™ Address
ÌRTTÎ
device in the system.
Exit and Save Configuration
Ì$-?Î
+