Datalogic PowerScan D8300 Reference Manual page 114

Enter Configuration
Ì$+;Î
The Codabar ABC code below uses a fixed start/stop character transmission selection.
no start/stop character equality control but transmission.
non start/stop character equality control but transmission
The code length selection is valid for the entire Codabar family
Read the code + 4 numbers for the code length where:
First 2 digits = minimum code length.
Second 2 digits = maximum code length.
The maximum code length is 99 characters.
The minimum code length must always be less than or equal to the maximum.
Examples: 0199 = variable from 1 to 99 digits in the code. 1010 = 10 digit code length only.
START/STOP CHARACTER CASE IN TRANSMISSION
The start/stop character case selections below are valid for the entire Codabar family:
CODE SELECTION
Codabar ABC
ÌAD212)Î
Codabar ABC Forced Concatenation
enable Codabar ABC with forced concatenation
ÌAD2321Î
CODE LENGTH (optional)
transmit start/stop characters in lower case
ÌADA0_Î
transmit start/stop characters in upper case
ÌADA1cÎ
Exit and Save Configuration
Ì$-?Î
set code length
ÌAD*AÎ
105