Inside Lever - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3 Installation (continued)
f

Inside Lever

1. Place inside lever horizontally onto lever
spindle. Hold lever firmly against the
escutcheon. (Figure 12)
2. Use the 1/8" Allen wrench to tighten the set
screw securely. Set screw should seat in the
groove of the inside adapter. (Figure 13)
3. Pull on lever to test if set screw is properly
secured. (Figure 14)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 12
Figure 13
Adapter
Lever
Set Screw
Figure 14
6
FM467 03/20