Electrical & Tool Requirements - Insignia Sauna Series Installation Manual

Electrical Requirements RW108
Voltage Rating 220-240AC
Frequency Rating 50Hz
Power Rating 3400 Watts
Amperage 14.1 Amps
Always consult a qualified Electrician before connection as to suitability
Always Obtain Relevant Certification (minor Works Part P etc)
This Sauna must comply with current UK regulations
Your electrical contractor will understand ALL legal requirements of connection before undertaking
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF
1) Connect within current laws and IP directives.
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box.
Always use protection against electrical surge. Your shower should be treated the same as a home
computer. A surge protector should eradicate the possibility of burn out.
Subject to connection type, electrical work needs to be signed off by a fully qualified operative by
law. Failure to adhere to this will not only void your electrical warranty for your sauna, but could
www.insigniashowers.com
Electrical Requirements RW110
Voltage Rating
Frequency Rating
Power Rating
Amperage 12.5 Amps
any work or installation.
Note for electrician:
void your house insurance
220-240AC
50Hz
3000 Watts
Last Modified: 07/10/2021
Tools Required
•
Scissors
•
Knife
•
Spirit Level
•
Tape Measure
•
Philips Screwdriver
•
Electric Drill
•
Safety Gloves
•
Safety Glasses
04