Electrical & Tool Requirements - Insignia KY2216 Installation Manual

Table of Contents

Advertisement

Electrical Requirements Model KY2216
Always consult a qualified Electrician before connection as to suitability
Always Obtain Relevant Certification (minor Works Part P etc)
This Sauna MUST NOT be directly connected to house sockets
Your electrical contractor will understand ALL legal requirements of connection before undertaking any work or
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF
1) Connect within current laws and IP directives. Subject to room location.
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box.
Always use protection against electrical surge. Your shower should be treated the same as a home computer. A
surge protector should eradicate the possibility of either the transformer or control panel being burnt out.
Subject to connection type, electrical work needs to be signed off by a fully qualified operative by law. Failure to
adhere to this will not only void your electrical warranty for your sauna, but could void your house insurance .
www.insigniashowers.com
Voltage Rating
220-240AC
Frequency Rating
50Hz
Power Rating
10880 Watts
Amperage
45 .3 Amps
installation.
Note for electrician:
Last Modified: 07/02/2022
Tools Required
Scissors
Knife
Spirit Level
Tape Measure
Philips Screwdriver
Electric Drill
Safety Gloves
Safety Glasses
04

Advertisement

Table of Contents
loading

Table of Contents