Section 4 Overview; Specifications; Environmental Conditions; Safety Instructions - Thermo Scientific 88882017 Operating Manual

Section 4 Overview

4.1 Specifications

Rotation Speed Speed Range..................................................................2~40rpm
Display Accuracy..................................................................1rpm
Speed Accuracy................................................................±1rpm
Rocking Angle
Rocking Mode..........................Left right reciprocating motion
Angle Range........................................................................1°~24°
Angle Accuracy.............................................................................±1°
Load Maximum Load (Centered on tray)..................................16pcs
(dia 10~20 mm tube)/ 7pcs (dia 22~30 mm tube)
Double Tray Load Maximum Load (Centered on tray)..................................30pcs
(dia 10~20 mm tube)/ 14pcs (dia 22~30 mm tube)
Size Overall Dimensions........................................411×149×146mm
Tray Dimensions...............................................330×140×15mm
Packaging Dimensions.................................467×210×220mm
Weight Net Weight.................................................................3.4Kg(7.5lb)
Gross Weight ........................................................4.5Kg(9.9lb)
Input Requirement..................100-240VAC ～, 50/60Hz, 0.1A
Power Supply
Output Requirement.....................24V , 1A
Others Certificate.................................RoHS, WEEE, cCSAus, CE Mark

4.2 Environmental Conditions

Application Environmental Conditions: indoor use
Temperature....................................................................5 to 40℃
Voltage Fluctuation.....................±10% of the nominal voltage
Altitude...........................................................................≤2,000 m
Humidity...................................................................... 20% to 85%
Storage Environmental Conditions
Temperature....................................................................0 to 60℃
Humidity.......................................20% to 85%, non-condensing
5 Section 4 | Overview
.

4.3 Safety Instructions

Please read the entire instruction manual
before operating the Digital Rocker.
WARNING DO NOT use the Digital
Tube Rocker in a hazardous
atmosphere or with hazardous
materials for which the unit was
not designed. Also, the user
should be aware that the
protection provided by the
equipment may be impaired if
accessories used are no provided
or recommended by the
manufacturer, or are used in a
manner not specified by the
manufacturer.
CAUTION ! To avoid electrical
shock, completely cut off power to
the unit by disconnecting the
power cord from the unit or unplug
from the wall outlet. Disconnect
unit from the power supply prior to
maintenance and service. Any
spills should be removed promptly.
Bio hazard spills should be cleaned
using approved liquid promptly.
Solvent spills are a fire hazard.
Stop the unit immediately, and
DO NOT operate until clean up is
complete and vapors have
dissipated.
DO NOT immerse the unit for
cleaning.
DO NOT operate the unit if it
shows signs of electrical or
mechanical damage.
Position of Loads
Place the tube in the recommended
positions below:
1. Place tube in the groove of the Rubber
Mat .
Correct placement
Incorrect placement
Digital Tube Rocker 6