4.4 Loads, Angle and Speed
Loads of Single Tray
Tilt Angle
Tube(mm)
24°
dia 10~20
1°
dia 10~20
24°
dia 22~30
1°
dia 22~30
Loads of Double Tray
Tilt Angle
Tube(mm)
20°
dia 10~20
1°
dia 10~20
dia 22~30
20°
1°
dia 22~30
Warning: It may affect the maximum speed of the instrument if placing the overweight
tube.
7
Section 4 | Overview
Maximum Speed
Maximum Quantity
(rpm)
(pcs)
40
16
40
16
40
7
40
7
Maximum Speed
Maximum Quantity
(rpm)
(pcs)
35
30
35
30
35
14
35
14
Section 5 Operation
This chapter covers the control panel and its operation.
5.1 Control Panel
Speed/Tilt
2 4
④
rpm
degree
Run
Stop
Digital Tube Rocker
①
③
①. Run/Stop button: Start or stop the
instrument.
②. Mode button: Switch modes between
Speed and Tilt settings.
③. Rotary knob: Rotary knob is used to
increase/decrease the set Speed/Tilt
of the instrument.
④. rpm indicator: The light is on when
the instrument is running in Speed
Mode.
⑥
⑤
Mode
②
⑤. degree indicator: The light is on when
the instrument is running in Tilt
Adjustment Mode.
⑥. Speed/Tilt display Window: The
window displays set Speed/Tilt or
current speed (when the instrument
is running).
⑦. Gear I: When the switch is in " gear
I", the instrument power is on.
⑧. Gear O: When the switch is in " gear
O", the instrument power is off.
Digital Tube Rocker
⑦
⑧
8