Front Runner RRAC178 Manual

Rack mount shower cubicle

ENG

front runner

Rack Mount Shower Cubicle

RRAC178

READ ME !

Thank you for purchasing a Front Runner Rack Mount Shower Cubicle.

Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.

Refer to Page 2 for a list of all the components, quantities and tools required.

IMPORTANT WARNING!

IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD

RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT

RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND

DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO

INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY

FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.

Please call us if you have any questions about the installation of this product.

RRAC178_REV_A00

Table of Contents

Need help?

Do you have a question about the RRAC178 and is the answer not in the manual?

Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Page 2 Bottom Bracket Elbow M8 x 16 Button Head Bolt M8 x 25 Button Head Bolt M8 Schnorr Washer M8 x 16 x 1.6SS Flat Washer M8 Thin Nut M8 Nyloc Nut FIGURE 1.1 RRAC178_REV_A00 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
Page 3 1.6SS Flat Washers, M8 Schnorr Washers (Items 6, 7, 8 & 9) and the nuts inserted in 2.1 as shown Insert two Poles (Item 2) through both the holes in the Top Bracket (Item 3) as shown. RRAC178_REV_A00 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
Page 4 Pole (Item 2). Slide the other ends of the Elbows into the two Poles inserted in 2.3 as shown. Close the Cubicle by slide it along the rail to the other side. RRAC178_REV _A00 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
Page 5 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam Share your adventures on: ©...