Front Runner RRAC189 Assembly And Mounting Instructions

Fork mount bike carrier / power edition

Table of Contents

Download this manual

ENG

front runner

Fork Mount

Bike Carrier / Power Edition

RRAC189

READ ME !

Thank you for purchasing a Front Runner Fork Mount Bike Carrier / Power Edition.

Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.

Refer to Page 2 for a list of all the components, quantities and tools required.

IMPORTANT WARNING!

IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD

RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT

RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND

DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO

INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY

FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.

Please call us if you have any questions about the installation of this product.

RRAC189_REV_A00

Table of Contents

Need help?

Do you have a question about the RRAC189 and is the answer not in the manual?

Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Page 2 Fork Mount Holder Quick Release M8 x 20 Hex Head Bolt M8 Nyloc Nut M8 Nut Cap M6 x 16 Button Head Bolt M6 Nyloc Nut M6 Nut Cap Angled Bracket Strap 300mm FIGURE 1.1 RRAC189_REV_A00 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 3 Hex Bolts and line up the Bracket with the 13MM center of the Thru Axle Bracket. Secure the Rear Wheel Bracket to the Load Bars using M8 Nyloc Nuts (Item 6). Place M8 Nut caps over all Hex Bolts. RRAC189_REV_A00 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 4 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutﬁtters #BornToRoam...