Advertisement
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
FRONT RUNNER CAN NOT RECOMMEND A MAXIMUM LOAD CARRYING CAPACITY. PLEASE REFER TO YOUR VEHICLE MANUFACTURER'S RECOMMENDATIONS. IT IS CRITICAL
THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN
AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS
TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU
MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU
DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE
INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
RRAC901_REV_A02
Load Bed Nut Kit
Toyota Tacoma 2004+ / Tundra 2007+
READ ME !
Thank you for purchasing a Front Runner Load Bed Nut Kit.
Refer to Page 2 for a list of all the components, quantities and tools required.
Please call us if you have any questions about the installation of this product.
IMPORTANT WARNING!
1
© COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS
ENG
RRAC901
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Front Runner RRAC901
Summary of Contents for Front Runner RRAC901
- Page 1 TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
- Page 2 GET ORGANIZED IN THE BOX TOOLS NEEDED M8 Bolt Plate M8 x 40 Carriage Bolt M8 x 16 x 1.6SS Flat Washer M8 Nyloc Nut 13mm M8 Nut Cap FIGURE 1.1 RRAC901_REV_A02 © COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 3 When assembling the Legs, discard the Fitting Instructions received with the Legs (Document LASS026) and assemble the Legs as per Assembly Instructions received with your Nut Kit (RRAC901). Not all of the components received with the Legs will be used as they will be replaced by the Nut Kit.
- Page 4 Center the Rack left to right. Apply weight/downward pressure to the Rack so that the Slats are sitting flush onto the Legs and Fasten the M8 Nyloc Nuts securing the Rack to the Legs. Place the M8 Nuts Cups over all the M8 Nyloc Nuts. RRAC901_REV_A02 © COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 5 When assembling the Legs, discard the Fitting Instructions received with the Legs (Document LASS026) and assemble the Legs as per Assembly Instructions received with your Nut Kit (RRAC901). Not all the components received with the Legs will be used as they will be replaced by the Nut Kit.
- Page 6 Center the Rack left to right. Apply weight/downward pressure to the Rack so that the Slats are sitting flush onto the Legs and Fasten the M8 Nyloc Nuts securing the Rack to the Legs. Place the M8 Nuts Cups over all the M8 Nyloc Nuts. © COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS RRAC901_REV_A02...
- Page 7 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or Online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam Share your adventures on: ©...
Need help?
Do you have a question about the RRAC901 and is the answer not in the manual?
Questions and answers