fantastic furniture Yarra Bedside With USB HUB Manual page 7

Step 5
You will need
2 x Cam Nuts Phillips Head
(H4) Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Attach Rail (P5) to Right Side Panel (P4) with 2 x Cam Nuts (H4). Tighten with a Phillips
Head Screwdriver.
Step 6
You will need
3 x Dowels
1 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
Insert 3 x Dowels (H1) into Right Side Panel (P4). Attach Rails (P6&P7) to Right
Side Panel (P4) with 1 x Cam Nut (H4). Tighten with a Phillips Head Screwdriver.
fantasticfurniture.com.au
(P5)
(P7)
(P6)
(P4)
(P4)
Page 7