Summary of Contents for fantastic furniture Yarra Bedside With USB HUB
Page 1
Version 1.0 Yarra Bedside With USB HUB fantasticfurniture.com.au...
Page 2
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
Top Panel (P9) What you need to assemble the product Top Panel (P1) Rail (P5) DO NOT USE Rail (P6) Right Side Other tools you need: Rail Phillips head screwdriver; Panel (P7) (P4) Back Panel (P8) Parts list Bottom Panel Left Side Top Panel (P1);...
Page 5
Step 1 You will need 4 x Small 1 x CL Runner Screws (H5) Track (H6) (P4) 1 x CR Runner Phillips Head Track (H7) Screwdriver (P3) Attach 1 x CL Runner Track (H6) and 1 x CR Runner Track (H7) to Left & Right Side Panels (P3&P4) with 4 x Small Screws (H5).
Page 6
Step 3 You will need 1 x USB 4 x Screws Connector (H17) (H14) (P7) Phillips Head Screwdriver (P7) Separate Cover from USB HUB as shown. Attach 1x USB HUB to Rail (P7) with 4x Screws (H17) by tightening with a Philips Head Screwdriver. Attach Cover to USB HUB as shown. Step 4 You will need 4 x Small...
Page 7
Step 5 You will need (P5) 2 x Cam Nuts Phillips Head (H4) Screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
Page 8
Step 7 (P3) You will need 3 x Dowels 3 x Cam Nuts (H1) (H4) (P5) Phillips Head (P6) Screwdriver (P7) Insert 3 x Dowels (H1) into Rails (P6 & P7). Attach Left Side Panel (P3) to Rails (P5 & P6 & P7) with 3 x Cam Nuts (H4). Tighten with a Phillips Head Screwdriver. Step 8 (P8) Ensure laminated...
Page 9
Step 9 You will need (P2) 4 x Dowels 4 x Medium (H1) Screws (H2) Phillips Head Screwdriver (P3) (P4) Insert 4 x Dowels (H1) into Left & Right Side Panels (P3&P4). Attach Bottom Panel (P2) to Left & Right Side Panels (P3&P4) with 4 x Medium Screws (H2). Tighten with a Phillips Head Screwdriver.
Page 10
Step 11 (P9) You will need (P5) 4 x Small Phillips Head Screws (H5) Screwdriver (P4) (P3) Attach Top Panel (P9) to Rail (P5) with 4x Small Screws (H5) by tightening with the Phillips Head Screwdriver. Step 12 You will need 4 x Cam Bolts Phillips Head (H3)
Page 11
Step 13 You will need (P1) 4 x Dowels 4 x Cam Nuts (H1) (H4) (P4) Phillips Head (P3) Screwdriver Insert 4x Dowels (H1) and 4 x Cam Nuts (H4) into Left & Right Side Panel (P3&P4) as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Top Panel (P1) to Left &...
Page 12
Step 15 You will need (P12) 4 x Cam Nuts Phillips Head (H4) Screwdriver (P13) This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so (P11) it tightens over the bolt.
Page 13
Step 17 You will need (P14) 4 x Medium Phillips Head (P12) Screws (H2) Screwdriver (P13) Attach Drawer Back (P14) to Left & Right Drawer Sides (P12&P13) with 4 x Medium Screws (H2) by tightening with the Phillips Head Screwdriver. Ensure the Drawer Base lines up with the grooves the whole way around the drawer before securing.
Page 14
Step 19 Insert the assembled drawers into the corresponding compartments as shown. Ensure the drawers slide easily along the rails. Step 20 You will need 4 x Wedges 4 x Wedge (H12) Screws (H13) (P8) Phillips Head Screwdriver Secure Back Panel (P8) in place with 4 x Wedges (H12) using 4 x Wedge Screws (H13) by tightening with the Phillips Head Screwdriver.