fantastic furniture Yarra Bedside With USB HUB Manual page 6

Step 3
You will need
1 x USB
4 x Screws
Connector
(H17)
(H14)
Phillips Head
Screwdriver
Separate Cover from USB HUB as shown. Attach 1x USB HUB to Rail (P7) with 4x Screws (H17)
by tightening with a Philips Head Screwdriver. Attach Cover to USB HUB as shown.
Step 4
You will need
4 x Small 2 x Hinges
Screws (H5) (H18)
Phillips Head
Screwdriver
Attach 2 x Hinges (H18) to Rail (P5) with 4 x Screws (H5). Tighten with a
Phillips Head Screwdriver.
fantasticfurniture.com.au fantasticfurniture.com.au
(P7)
(P7)
(P5)
Page 6