Advertisement
Step 15
You will need
4 x Cam Nuts
Phillips Head
(H4)
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H4) into Left & Right Drawer Sides (P12&P13) as shown. Rotate
the cam nuts so the arrows point towards the incoming cam bolts. Attach Left & Right
Drawer Sides (P12&P13) to Drawer Front (P11) by tightening the cam nuts with the Phillips
Head Screwdriver.
Step 16
Slide Drawer Base (P15) into the grooves of Left & Right Drawer Sides (P12&P13).
fantasticfurniture.com.au
(P12)
(P12)
(P11)
(P15)
(P13)
Ensure laminated
side of panel is
facing inwards.
(P13)
Page 12
Advertisement
