Sampling Set Up; Logging Set Up - Valeport TideMaster Operating Manual

Section 6 | Set Up
The MiniCT sensor cannot currently be enabled via the on screen menus. The instrument must be
interrupted (See section 9) and the following commands used to enable/disable. A miniCT set up
menu will be available once the sensor is enabled.
Reads back current miniCT status (0 – disabled, 1 – Enabled)
#075
#074;0 Disables miniCT sensor
#074;1 Enables miniCT sensor

6.2.2 Sampling Set Up

The sampling set up of the instrument can be configured in this menu. Default burst modes can be selected
or a custom sampling mode can be user defined.
Sampling
•
Burst
➢
B1 - 30s/1 min
-
B2 - 40s/6 min
-
B3 - 40s/10min
-
B4 - 40s/15min
-
B5 - 60s/30min
-
Continous
➢
M1 - 1Hz
-
Custom
➢
Burst Interval Mins
-
Enter Value
•
Burst Duration Secs
-
Enter Value
•

6.2.3 Logging Set Up

Date/Time can be configured in this menu, and any existing data files erased from the unit.
Logging
•
Set Time/Date
➢
DD/MM/YYYY HH:MM:SS
-
Clear Memory
➢
Yes
-
No
-
Page | 21
© 2021 – Valeport Ltd