Table of Contents
Advertisement
Data is both logged and output in the selected format. For a pressure sensor the conversion from pressure
to depth will be based on the calibration factors stored in the TideMaster. This is not required for a radar
sensor.
© 2021 – Valeport Ltd
TideMaster - Operating Manual: MANUAL-1094978189-1 | issue: 1.1
A site name or details can be entered into the site info
box. This is a free text field.
For use in multi-gauge networks, a station ID can be
assigned to the TideMaster. This can be from 1-10
Display period defines the number of seconds the display
will come on for at the end of a burst.
Real time output can be transmitted in a number of
formats. The choice of format does not affect the logged
data which is always stored in the same format.
TideMaster format is the default choice although a
number of options have been added to ensure
compatibility with existing networks and equipment
All TideMasters are fitted with Bluetooth for short range
serial communications. If not required then this should be
disabled as it uses up valuable battery capacity. To retain
Bluetooth and save power it is possible to reduce the
number of bursts the Bluetooth is made available for.
Radio telemetry can be added to the system and a
variable transmission delay in seconds can be defined to
avoid conflicts.
Page | 26
Advertisement
Table of Contents
