I/O Circuit Diagram - Omron F10-C20 Instruction Sheet

3. I/O Circuit Diagram
F10-C20 NPN Models
There are gray, green, and red input lines, but they are not used with this
model. Take steps to ensure that these lines will not be short-circuited
with otyer lines.
Brown （Vcc）
Level in-
dioatora
Black
（8-level
← OUTPUT
green
Orange
LEDs）
Result
Yellow
indicator
（1-level
orange
purple
LED）
Amplofi-
er main
circit
Pink
Status
Indioa-
tors
（3-level
White
green
LEDs）
Thresh-
old indicators
Blue
（7-level red
（GND）
LEDs）
Note: Ground or connect the shielded cable to 0V.
The shield is not connected to the interior or casing.
Load
Load
← ENAB
S̲TEACH
We recommend
using OMROǸs
S82K-01524 Power
Supply.
M̲TEACH
DC21.6〜26.4V
TRIG
CONT
Shield FG(see note)
11
F10-C25 PNP Models
There are gray, green, and red input lines, but they are not used with this
model. Take steps to ensure that these lines will not be short-circuited
with otyer lines.
Brown （Vcc）
Level in-
dioatora
Yellow
（8-level
green
LEDs）
purple
Result
indicator
（1-level
Pink
orange
LED）
White
Amplofi-
er main
circit
Status
Indioa- Black
tors
（3-level
green
Orange ENAB→
LEDs）
Thresh-
Blue （GND）
old indicators
（7-level red
LEDs）
Note: Ground or connect the shielded cable to 0V.
The shield is not connected to the interior or casing.
S̲TEACH
M̲TEACH
TRIG
We recommend
using OMROǸs
S82K-01524 Power
CONT
Supply.
DC21.6〜26.4V
OUTPUT→
Load
Load
FG(see note)
Shield
12