Table of Contents
Advertisement
Maintenance Continued
Clean detergent box and grooves
Clean detergent drawer and grooves
1.
Press down the arrow location on softener cover inside
the drawer.
2.
Lift the clip up and take out softener cover and wash all
grooves with water.
3.
Restore the softener cover and push the drawer into
position.
Clean inlet filter
The inlet filter should be cleaned if there is insufficient water
filling when the tap is opened.
Clean the tap filter:
1.
Turn off the tap.
2.
Select any procedure except "Wash" or "Drain"
procedure.
3.
Press the "Start/Pause" button and keep the procedure
running for about 40 seconds.
4.
Remove the inlet pipe from the tap.
5.
Use water to wash the filter.
6.
Reconnect the inlet pipe.
Washing the filter in washing machine:
1.
Screw off the inlet pipe from the backside of the
machine.
2.
Pull out the filter with long nose pliers and reinstall it
back after being washed.
3.
Reconnect the inlet pipe.
4.
Open the tap and make sure there is no water leakage.
5.Close the tap.
Note:
Generally, the tap filter is washed first and then the filter
in washing machine will be washed.
If only the filter in washing machine is washed, then the steps
1~3 in cleaning the tap filter shall be repeated.
P.23
17
P.23
Advertisement
Table of Contents
