Advertisement
Step 9
You will need:
2 x Cam
Nut
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Back Support Rail (P10) and Back Rail (P9) to Left Side (P2), insert Cam Nut
(H2) into Rail(P9, P10), rotate the Cam Nuts so the arrow point towards the incoming
cam bolt, turn clockwise to lock.
Step 10
You will need:
5 x Cam
Nut
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Front Rails (P6) and Front Support Rail (P8) to Left Side (P2), insert Cam Nut
(H2) into Rail(P6, P8), rotate the Cam Nuts so the arrow point towards the incoming
cam bolt, turn clockwise to lock.
www.fantasticfurniture.com.au
(P2)
x 5
(P8)
(P9)
(P10)
(P6) x 4
PAGE 9
Advertisement
