Advertisement
Step 17
You will need:
4 x Cam
Nuts
(H19)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Drawer Support Rail (P16) to Drawer Front (P12), insert small Cam Nut
(H19) and use a Philip head screw driver turn clockwise to lock.
Step 18
Slip Drawer Base (P15) into the grooves on the Drawer Sides.
www.fantasticfurniture.com.au
(P16)
(P15)
X4
with
lamination
face inside
X4
PAGE 13
Advertisement
