Advertisement
Step 13
You will need:
6 x Cam
Nuts
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Top Panel (P1) to the unit as
show on picture.
Insert Cam Nuts (H2) and use a Philip
head screw driver
turn clock wise to lock.
Step 14
You will need:
4 x Back
Panel Support
(H5)
4 x Wood
Screws
(H6)
4 x Wood
Screws
(H15)
Phillips head
screwdriver
Fix Back Panel (P11) to Back
Rail (P9) by using 4 Wood
Screws (H15).
Fix Back Panel Support (H5)
to each corner on the back by
using Wood Screws (H6).
www.fantasticfurniture.com.au
(H15)
(H5)
(H6)
PAGE 11
Advertisement
