8-4-1. Reading Settings
"Reading settings" must be done before setting cameras. Control "NodeMap" on
the right side of the StViewer window.
1)
1) Select "User Set Selector" Node.
2) Select "User Set 1" from the list.
*This system uses "User Set 1".
3)
3) Click the "Execute" button in "User Set Load" Node.
Camera settings will be read.
8-4-2.Saving Settings
After configuration, this tool can "save" these settings.
1)
2)
1) Confirm
that"User Set
2) Click the "Execute" button in "User Set Save"Node.
Camera settings will be saved.
2)
1" is selected in "User Set Selector"Node
39