Trigger Recording - Omron STC-FDR-SW01 User Manual

6-3. Trigger recording

This recording allows cameras to record videos before/after events by using specified
event signal for trigger.
The behavior of trigger recording can be configured at the [Trigger recording settings] tab
in the Advanced setting window.
No.
１ Event signal
２ Recording time
３ Trigger occurrence time (time
trigger)
４ Detection condition (trigger
signal)
５ Detection condition (motion
detection / master image
comparison)
①
④
Name
②
③
⑤
⑥
⑦
Selects type of trigger recording.
Sets trigger recording time.（※1）
Range: 300 sec. before trigger – 300 sec. after
trigger
If [Time trigger] is selected in the
Event signal section,
trigger time can be specified.
Range: 0:00 – 23:59
If [Trigger signal] is selected in the Event signal
section, a camera to receive trigger signal can
be selected.
If [Motion detection] or [Master image
comparison] is selected in the Event signal
Description
20