Omron STC-FDR-SW01 User Manual page 32

After recording is done, next event can be occurred without waiting for recording time
completion before the event. ("Recording 5" in the diagram)
Camera 1
Camera 2
3) Trigger signal (external input signal)
Recording runs only for camera selected in detection condition (trigger signal) settings.
Recording will not run even if cameras not selected in detection condition (trigger signal)
settings input external signals.
4) Trigger signal (TCP command input)
Camera specified by TCP command starts recording.
Recording will not run even if cameras not selected in detection condition (trigger signal)
settings input external signals.
Camera 1
Camera 2
Camera 3
Camera 4
Status display during trigger recording
Status [REC] button
clicked (Start
recording)
Display Preparing to
record
Event
Recording 4 Recording 5
Recording 5
Recording 4
"trigger 1"
Recording
"trigger 2"
Recording
Before trigger
Recording time
passed
I'm shooting
Event
: TCP command occurrence
"trigger 3"
Recording
Triggered After trigger
Recording time
passed
The video is I'm shooting
being saved
"trigger 1"
Recording
"trigger 4"
Recording
[REC] button
clicked
(End recording)
I'm shooting
32