To Remove Heater - Panasonic WH-MXC09J3E8 Service Manual

18.9

To Remove Heater

2. Remove terminal cover by releasing
1 screw, then remove the Overload
Protector (OLP) lead wire (Blue),
(Black) and (Orange).
1. Remove 4 lead wire, HT1-L2
(Orange), HT-L3 (Red)
and AC2-N2 (White) and N1
(White) from below the Heater.
ORANGE
RED
LEAD WIRE FIXING FOR HEATER
Heater
3. Remove 1 screw from the Heater Bracket
4. Release 2 retaining ring, and slowly remove
the Heater Complete.
201
BLUE
BLACK
ORANGE
ORANGE
LEAD WIRE FIXING FOR OLP
WHITE
1
WHITE
2 2
1
BLUE
BLACK