Panasonic WH-MXC09J3E8 Service Manual page 23

Menu
2 System check
2.1 Energy monitor
Present or historical chart of
energy consumption, generation
or COP.
• COP= Coefficient of Performance.
• For historical chart, the period is selected from 1 day/1 week/1year.
• Energy consumption (kWh) of heating, *
retrieved.
• The total power consumption is an estimated value based on AC 230 V and
may differ from value measured by precise equipment.
2.2
System information
Shows all system information in
each area.
2.3
Error history
• Refer to Troubleshooting for
error codes.
• The most recent error code is
displayed at the top.
2.4
Compressor
Shows the compressor
performance.
2.5
Heater
Total hours of ON time for
Room heater/Tank heater.
3 Personal setup
3.1
Touch sound
Turns the operation sound ON/
OFF.
3.2
LCD contrast
Sets the screen contrast.
* 1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
* Only displayed when COOL mode is unlocked (This means when COOL mode is available).
2
Default Setting Setting Options / Display
Present
Select and retrieve
Historical chart
Select and retrieve
1, * 2 cooling, tank and total may be
Actual system information of 10 items:
Inlet / Outlet / Zone 1 / Zone 2 / Tank /
Buffer tank / Solar / Pool / COMP
frequency / Pump flowrate
Select and retrieve
Select and retrieve
Select and retrieve
Select and retrieve
ON
3
23