Table of Contents
Advertisement
SL7000SERIES HAND HELD
This is programmable 0 to 1000ms at 50ms intervals. The transceiver transmits 2-tone frequency after this duration
elapsed.
Auto Reset Time
-
This is programmable 1 to 255 seconds at 1 second intervals. The transceiver carries out predefined actions if a valid
code is received. If there is no response about the actions within this time, then the transceiver stops current actions
automatically.
Remind Time
-
This time is programmable 1 to 255 seconds at 1 second intervals. 'CALL' displays during this time if there is no
response within Auto Reset Time. This function informs user, the transceiver received a call in the absence of the
user.
* Edit – 5-Tone
-
Signaling Operation
You can select ANI or Selcall as 'Signaling Operation'. If the transceiver receives 5-tone code, then pre-defined
actions(code display, icon blink, etc.) are carried out.
ANI: the transceiver displays the received code. The corresponding text will be displayed if the received code exists
in RX Code List. The code or text disappears if there is no response during 10 seconds.
Selcall: if the received code and the current channel's ID are equal, then selcall actions(LED, ICON, Alert Tone,
Squelch) are carried out.
TX Code List
-
You can store 5-tone codes in this list to generate 5-tone. If the current channel's signaling type is 5-tone and TX
Code Select & Enter function is activated, then these stored codes will be displayed. Press 'Call' Key to generate the
selected code.
Code: each code is editable up to 8 digits.
Text: each code has its text and the text is editable up to 8 characters.
Editable Digit: 5-tone code is editable in transceiver(code edit mode). You can select editable codes in this dialog.
33
Advertisement
Table of Contents
