Table of Contents
Advertisement
SL7000SERIES HAND HELD
If this function is activated, the power save function will decrease the amount of using power when a current channel
is no busy status and no operations are being performed. 'On Time', 'Off Time' and 'Delay Time' are programmable.
Beep Control
-
Beep sound can be programmable individually.
Lone Worker
-
Lone Worker is the function checks user's condition by the key input delay. If there is no key input within 'Check
Interval', then the transceiver beeps out warning for 'Warning Duration'. The transceiver goes to emergency mode if
there is no response within 'Warning Duration'.
-
Memory Channel
You can change channels quickly with this function. If 10-keypad is available, then you can set the specific channel in
each numerical key. You can set memory channels in each programmable key. The transceiver moves to the stored
channel immediately if the numerical key is pressed.
* Edit – Key Setting
Rotary Selector
-
29
Advertisement
Table of Contents
