Table of Contents
Advertisement
SL7000SERIES HAND HELD
Channel data is displayed like below in case of 'Group/Ch. Name'. '/' is a descriptor between group and channel
name.
Channel data is displayed like below in case of 'Ch. Name'. The group number is displayed for 1 second when
the group is changed.
Channel data is displayed like below in case of 'Ch. No.'. The group number is displayed for 1 second when the
group is changed.
-
The Length of Group Name
The length of group name is applied if channel display option is 'Group/Ch. Name'. This is programmable 1 to 8. For
example, if the group name is 'SHOP1' and the length of group name is set to 3, then 'SHO' is only displayed to LCD
as a group name.
Roger Beep
-
If this option is checked, then the transceiver transmits roger beep after PTT key is released.
-
Clear to Talk
If this option is checked and PTT key is pressed, then the transceiver beeps out after 'Clear Time' elapsed.
'Clear Time' is programmable 100ms to 2000ms at 100ms intervals.
TX Delay
-
If this option is checked, then the transceiver transmits 'Turn Off Code' after PTT key is released. This function is
used for removing the squelch tail.
-
PTT ID
PTT ID is editable up to 16 characters. The transceiver transmits PTT ID when it goes to TX mode. You can select
DTMF or 5-tone as PTT ID type.
-
PTT ID Position
You can select BOT or EOT as PTT ID position. The transceiver transmits PTT ID at the beginning of TX if BOT is
selected. The transceiver transmits PTT ID at the end of TX if EOT is selected.
* Edit – Etc.
-
Power Save
28
Advertisement
Table of Contents
