Table of Contents
Advertisement
SL7000SERIES HAND HELD
Select 'None' or 'Group Selection', 'Channel Selection' as rotary selector's functionality. You can't assign 'Group
Selection'(Channel Selection) function to programmable key if rotary selector is already used for 'Group
Selection'(Channel Selection).
Group Selection: Rotary selector indicates the current group. If you'd like to move the group, then rotate rotary
selector to the group no. The transceiver will make no response if there isn't the group data in the current indicating
number.
Channel Selection: Rotary selector indicates the current channel. If you'd like to move the channel, then rotate rotary
selector to the channel no. The transceiver will make no response if there isn't the channel data in the current
indicating number.
-
Monitor
Select 'OFF' if you don't want to use this function.
Keypad
-
You can select 'DTMF', 'Direct Channel', 'Memory Channel', 'Memory Call' as keypad function. Please refer to user's
manual for more information about these functions.
-
Programmable Key
You can assign two functions to each programmable key, short key and long key. Long key can't be programmable if
the short key's function is 'Channel Up/Down' or 'Group Up/Down'. In this case, the channel or group is moved
continuously during long key event.
* Edit – DTMF
Signaling Operation
-
You can select ANI or Selcall as signaling operation. If the transceiver receives DTMF code, then pre-defined
actions(code display, icon blink, etc.) are carried out.
ANI: the transceiver displays the received code. The corresponding text will be displayed if the received code is in RX
Code List. The code or text disappears if there is no response during 10 seconds.
Selcall: if the received code and the current channel's ID are equal, then selcall actions(LED, ICON, Alert Tone,
Squelch) are carried out.
30
Advertisement
Table of Contents
