Maxon SL7000 Series Operational Description page 15

SL7000SERIES HAND HELD
Please confirm that the audio enable button is off before transceiver on.
Click the start button after setting the transceiver to ATE mode and connecting the every equipment correctly. To set
the transceiver to ATE mode, push and hold the PTT key and monitor button at the same time and transceiver on.
At this time, the rotary selector must be 16'th channel position. When the transceiver enters the ATE mode, 'TEST'
message will be displayed on the LCD for one second.
The window for inputting of serial number will be appeared after clicking of start button.
To start the auto testing, click the ok button after inputting of serial number. If the transceiver is not on or the
connection is not correct, error message will be displayed.
When the TX part testing is just started, the message to enable TX audio will be appeared.
When the RX part testing is just started, the message to disable TX audio will be appeared.
15