Table of Contents
Advertisement
SL7000SERIES HAND HELD
-
TX Code List
You can store DTMF codes are used frequently in this list. If the current channel's signaling type is DTMF and TX
Code Select & Enter function is activated, then these stored codes will be displayed by their text. Each code has its
text and the text is editable up to 8 characters. Press delete key to remove DTMF code from the list.
-
RX Code List
According to the Signaling Operation, RX Code List is used differently. If ANI is selected and the received code is in
RX Code List, then the corresponding text will be displayed. If Selcall is selected and the received code is in RX
Code List, then the corresponding actions(including the text) will be carried out.
-
First Tone Delay Time
This is programmable 0 to 1000ms at 50ms intervals. The transceiver transmits DTMF tone after this duration
elapsed.
-
First Tone Time
This is programmable 0 to 1000ms at 50ms intervals. The transceiver transmits first DTMF tone during this time. The
rest of tones are transmitted during Mark Time.
TX Hold Time
-
This is programmable 500 to 3000ms at 100ms intervals. The transceiver keeps TX mode during this time after
finishing tone generation. This time only applies in case DTMF tone is generated manually(manual dialing).
-
Mark Time
31
Advertisement
Table of Contents
