Maxon SL7000 Series Operational Description page 24

SL7000SERIES HAND HELD
Press enter key or double click to change channel space(Wide or Narrow).
- TX Power
Press enter key or double click to change TX Power(High or Low).
- Scan List
Press enter key or double click to change scan list setting. Scan-ON channels are only scanned while scanning.
- Lookback
Press enter key or double click to change lookback option. Lookback-on channels only look back priority channel
while scanning. Lookback function is not carried out if there is no priority channel.
Channel Name
-
Press enter key or double click to edit channel name. It is canceled if Esc key is pressed while editing. To confirm,
press enter key or move the cursor to other places while editing. Channel name is editable up to 8 characters.
Signaling
-
Press enter key or double click to configure signaling option. Signaling option dialog will appear. Signaling types
which were selected in available signaling type only appear in combo box. The related control will be activated after
selecting signaling type.
- BCLO(Busy Channel Lock Out)
Press enter key or double click to change BCLO option. Please refer to user's manual for more information about
BCLO.
- Marked Idle
Press enter key or double click to change marked idle option. Please refer to user's manual for more information
about marked idle.
Scrambler
-
The Scrambler is a voice inversion scrambler with a carrier frequency of 3.388 kHz. Press enter key or double click to
change scrambler option. Please refer to user's manual for more information.
* Edit – Start Logo & Password
Start Logo
-
24