Table 2-2: Customer Mounting Features - Aerotech QNP3 Series Hardware Manual

Mechanical Specifications and Installation
N O T E : For most applications, the maximum allowable acceleration is not the optimal acceleration.
Piezo stages are lightly damped and large accelerations will cause excessive position error with minimal
change in move times. Aerotech recommends determining the optimal acceleration for a given move
experimentally with the help of advanced tools included with the Aerotech controller, such as the Digital
Scope. Refer to controller documentation or contact Aerotech for more information.
Table 2-2: Customer Mounting Features
Stage
QNP3-100XYAZ-030-10
QNP3-100XYAZ-100-10
QNP3-150XYAZ-200-20
W A R N I N G : Refer to the dimensions in
engagement. A screw extending through the stage table can affect travel and damage the
stage.
24
Mounting Hardware
M3X0.5, 4.5 mm deep, threaded holes
Ø2 mm x 4 mm deep pin holes (slip fit)
M3x0.5, 6 mm deep, threaded holes
Ø2 mm x 4 mm deep pin holes (slip fit)
M4x0.7, 6 mm deep, threaded holes
Ø2 mm x 4 mm deep pin holes (slip fit)
Chapter 2
QNP3 Hardware Manual
Section 2.2. for maximum allowable thread
Quantity
4 Places
2 Places
4 Places
2 Places
4 Places
2 Places
www.aerotech.com