Installing Expansion Cards - Supermicro SC835 Series User Manual

5-6

Installing Expansion Cards

The chassis includes space for up to seven expansion cards.
I/O Port Panel
Figure 5-7. Expansion Card Slots and I/O Ports
Installing Expansion Cards
1. Remove the chassis cover.
2. Locate the motherboard port aligned with the card slot you want to install.
3. Each slot is secured by one screw located on the top (inside) the chassis.
Remove this screw.
4. Gently slide the expansion card into the correct motherboard slot. If the expan-
sion card requires a riser card, install it at this time. If necessary, slide the card
into the PCI card guide and lock it. Never force a component into a motherboard
or the chassis.
5. Secure the expansion card with the screw from the I/O panel.
Chapter 5: Chassis Setup
5-9
Expansion Card Slots