168
If something happens
Electrical fault general lookup
The first step to take when troubleshooting the
electrical system is to check the fuses in the
bus electrical center and check the messages
displayed by the On-Board Diagnostic (OBD)
system.
A burnt-out fuse can be seen with the eye.
In this case, remove the fuse from the fuse
holder and replace it. If the same fuse burns
repeatedly, the bus should be contact to a
Prevost or Volvo authorized dealer to have
the electrical system repaired.
WARNING
Never replace fuses with higher capacity
fuses or with metal elements like wires,
coins, etc.