Alternative towing procedure
Note: This procedure apply only for
buses equipped with I-Shift AMT-D
(Automatized Manual Transmission) and
have the management software that include
the alternative towing function.
If can not follow the bus standard towing
procedure due to road conditions or any
other circumstances, the I-Shift transmission
provides an alternative function to bus towing
which will allow it to tow the bus without
axle drive shafts or drive wheels main shafts
removals regardless of the distance that the
vehicle needs to travel during the towing.
For the alternative towing procedure can take
place, you must engage the 3 HR speed in
the transmission; for this it to be possible
you must meet certain conditions, follow the
alternative towing procedure described at the
next page.
CAUTION
Do not replace the towing standard
procedure, this procedure does not have
any indicator, if any of the steps below
are not fulfilled a transmission damage
may be occur.
If something happens 151