Table of Contents
Advertisement
If something happens 167
License plate lighting
License plate lighting lamp replacement
Replace the license plate lamp as follows:
1 Unscrew the cover fixing screws of the
lamp.
2 Replace the lamps(s) as required.
3 Check for proper operation.
4 Assembly the lamp set.
Note: Make sure that the lamp is replaced
with a new lamp of 24 V, the same type and
power rating (see the lamp part number in the
W0089795
following section on this manual: "Bulbs for
lighting lamps", page 198).
- Quick Links:
- Instruments and Controls
- Faults and Warnings
Hide quick links:
Advertisement
Table of Contents
