118
Starting and driving
Cruise control activation
To activated the cruise control do the
following:
•
Move the switch B in the control lever at
the steering column left side to the ON
position.
•
When the bus reached the desired speed,
press the "SET" button A located in the
same lever to the "+" or "-" position for
idle speed established.
•
Press the "SET" button A in the same lever
to the "+" position for increase established
idle speed.
•
Press the "SET" button A in the same lever
to the "-" position for decrease established
idle speed.
Note: If the speed is desired to increase
temporarily, for example; to pass other
vehicle, accelerate the bus and when you
finish the maneuver, release the throttle and
move the switch B in the control lever at the
steering column left side to the RESUME
position and release the button. The bus
return to the established speed.
T0012078