Introduction 1; Driver's Responsibility - Volvo 9700 US/CAN 2016 Driver's Handbook Manual

Driver's responsibility

•
As the driver, you are responsible for
the safety and comfort of the passengers
during the journey. Therefore, do not
drive the bus before you have read this
driver's manual. You must be familiar with
all the indicators and warning lights and
know what to do if something unexpected
happens.
•
As the driver of the vehicle, you should be
aware of the vehicle weight and loading
capacity. See instructions on warning
stickers, the vehicle registration book and
on the identification plate.
•
As the driver of the vehicle, it is your
responsibility to foresee any hazards that
could threaten your passengers.
•
It is also your responsibility to ensure
that all the safety equipment of the bus is
in place. Therefore check regularly the
working order of safety belts, emergency
door and window opening, door sensitive
edges, fire extinguishers and first aid
equipment.
•
The brakes on the bus are operated by
compressed air. Never drive if the air
pressure is too low or if you discover other
problems with the brakes.
•
Pay attention to any steering faults. The
vehicle can be steered even if the power
steering is not working, although the
steering will be heavy.

Introduction 1

•
Never crawl under the bus if it is supported
by a "hydraulic jack". Use approved
vehicle supports or a solid pallet in case of
punctures or wheel changes.
•
Lifting devices and supports should stand
securely on a horizontal surface. The
wheels that are not to be lifted should be
blocked to ensure that the vehicle will not
start to move.
•
Re-tighten the wheel nuts after
approximately 125 mi (200 km) if the
wheels have been removed.
•
Tighten the wheel nuts every 6 months
regardless of whether the wheels have
been removed or not.
•
Follow the recommended service and
maintenance program to maintain the bus's
condition and safety.
•
Pay attention to exhaust and fuel smells.
Any leaks should be taken care of
immediately at the garage.
•
The bus tires and rims should be
approved for the intended load and
speed in accordance with current legal
requirements.