18
Instruments and controls
Faults and warnings
There are three different types of signals that
give the driver all the necessary information
on the vehicle:
•
STOP message.
•
WARNING message.
•
Stop at the next bus stop message.
Above the display there are three lamps
for (Stop at the next bus stop, WARNING
and STOP messages), that alert the driver's
attention when necessary.
Messages with appropriate symbols are
shown automatically on the display.
Several messages can be active
simultaneously. A new message will
only replace the current message on the
display if it is of higher priority. This means
that the display always shows the message
with the highest priority.
For more detailed information about display
functions, see separate operating instructions:
"Display".
Stop message.
Warning message.
Stop at the next bus stop message.
T3014364
T3014365
W3079585