Windshield washer fluid
Check the level of the washer fluid in the
reservoir. Top up if necessary.
For add the washer fluid, do the following:
•
Open the front left lower side hatch
(to refer, see the following sections
on this manual: "Doors and hatches
configuration", page 10 or "Doors and
hatches configuration (bus with WCL)",
page 11).
•
Lid the fluid reservoir cap.
•
Place a funnel in the fluid reservoir filler
neck and pour the washer fluid.
•
Add a washer fluid up to its between of
the "MAX" and "MIN" marks on the
corresponding fluid reservoir.
•
Close the washer fluid reservoir.
•
Close the front left lower side hatch.
Note: In winter use a washer fluid for lower
temperatures to avoid the fluid freezing inside
reservoir.
Starting and driving 107
W0100282