Cruise Control
Cruise control is activated by moving the
switch (B) to the ON position.
When the bus reached the desired speed,
press the "+" or "–" side of the SET button
(A). The set speed is increased or decreased
by pressing the "+" or "–" side of the switch
respectively.
If the speed is temporarily increased, e.g. for
overtaking, the vehicle will return to the set
speed when the accelerator is released.
Cruise control is deactivated if:
•
the brake pedal is depressed
•
the retarder stalk is moved to another
position
•
the switch (B) is moved to its OFF position
After cruise control has been switched off,
the most recent set speed can be restored by
moving the switch (B) to RESUME. This
however does not apply if cruise control has
been deactivated by moving switch (B) to its
OFF position.
Starting and Driving 89
T0012078