Data Logmode - SiTime Time Machine II User Manual

Data log mode allows storing additional information about programmed parts and order
during batch programming. To switch to the data log mode please select
shown in the figure below.
Data Log Utility has fields for entering ordering information, operator lot information and
part number. Fields marked with red asterisk should be filled mandatory. Once required
information is entered, it's possible to start programming session.
Operator'sname
Quantityof parts to be
programmed
Lot ID
Operation selection
Channel selection
Sample request number
Part number field
Customer FP part number
Message window
Mean part programming
time
Session start time
Quantity of processed parts
(programmed + failed)
Device status
At the beginning of programming session
P a g e 14 |
Data Log Mode
Part Number Generator
© 2013 SiTime Corporation. All rights reserved.
Time Machine User's Manual
Operation indicator
appears showing decoded
View > Data Log as
Sessionstart button
Session end time
Session yield