Advertisement
Quick Links
TeleEye MX710-HD/MX810-HD/MX910-HD Network Camera
This Quick Start Guide will guide you how to install and configure the TeleEye MX710-HD / MX810-HD / MX910-HD
Network Camera for remote video monitoring.
Camera Installation
Step 1.
After mounting the camera on the wall or ceiling, connect the Ethernet cable to the LAN adapter and
the 12VDC power supply to the power cable if PoE is not available. Please refer to the section "RJ45
wiring" for connecting the cable to RJ45 plug.
Step 2.
Start sureSIGHT or a web browser to start a remote video
monitoring in order to adjust the camera.
[Reference] Please refer to the following sections to understand how to start
video monitoring.
Step 3.
After removing the camera cover, loosen the screws to
adjust the viewing angle of the camera.
Step 4.
Tighten the screws to fix the direction of the camera module.
Finally , close the camera cover.
Quick Start Guide
1
Advertisement
Related Manuals for TeleEye MX710-HD
Summary of Contents for TeleEye MX710-HD
- Page 1 Quick Start Guide TeleEye MX710-HD/MX810-HD/MX910-HD Network Camera This Quick Start Guide will guide you how to install and configure the TeleEye MX710-HD / MX810-HD / MX910-HD Network Camera for remote video monitoring. Camera Installation Step 1. After mounting the camera on the wall or ceiling, connect the Ethernet cable to the LAN adapter and the 12VDC power supply to the power cable if PoE is not available.
- Page 2 Close the tab IP Setup Utility Step 1. After installing sureSIGHT and turning on the Network Camera, select the “Run TeleEye IP Setup Utility” from the windows start menu. Step 2. Search the target camera by its serial number, highlight the corresponding row from the list on the left side of the window to select it.
- Page 3 Live Monitoring with Web-Browser Step 1. Open a web browser on a PC and type in the IP address of the Network Camera. Step 2. Select the connection type and input the password. [Note] The default password is “000000”. Step 3. Click the [Connect] button to connect the selected video stream.
- Page 4 Live Monitoring with sureSIGHT Step 1. After installing sureSIGHT and turning on the Network Camera, select the “Run sureSIGHT Lite” from the windows start menu. Input the password to log-in to the sureSIGHT. [Note] The default password for administrator is “000000”. Step 2.