jcb RTFL 926 Operator's Manual page 75

Operation
Working with the Machine
Fork Ratings
!M
WARNING
Do not exceed the total rated load capacity of the forks
being used. Forks can break resulting in a loss of load
and possible injury.
0003
JCB approved forks for this machine are marked with a
maximum load capacity rating A. The rating shows the
maximum load capacity in kilograms (kg) that the forks can
carry safely at the maximum load centre B of 500mm (20
inches).
The total load rating for two forks will be the addition of
347950-4
their single rated capacity.
Fig 45.
Forks must be used in matched pairs.
The maximum rated load capacity of the machine is shown
in Performance Dimensions (Specifications Section).
The forks used on this machine must have a total load
rating which is equal to, or exceeds the rated load capacity
of the machine.
If the load rating of the machine is different to the load
capacity of the forks, the lower value must be used as the
overall load capacity.
All lifting equipment, including forks and their mountings,
need regular inspection and testing by a competent person
to ensure they are fit for purpose. Refer to Fit for Purpose
Tests for Lifting Equipment (Routine Maintenance
Section).
65 9811/5700-7 65